Over the last 24 years, the founding partners of Piling Products have worked hard to build our company into an organization of employees dedicated to providing our customers with the best possible products, best possible service and best possible price. There is no order too big or too small and we pride ourselves on our quick response to customer inquiries.
We carry an extensive inventory of Sheet Piling for Rental. We can offer very speedy delivery and both hot rolled and cold formed sheeting for sale and rental.
There is simply no project we cannot offer a quotation on. We can aid in design, and submittals and have an engineer on staff.
At your convenience, Please contact us and we will be happy to discuss your project with you. We look forward to providing you the best service in the industry.
Piling Products is part of a corporate group including:
Sheet Piles are by definition, structural units which when connected one to another, will form a continuous wall, generally for retaining earth or excluding water. Individual pieces or pre-interlocked pairs, are installed by driving them into the earth using impact hammers, vibrators or by water jetting. In functioning as a wall, the sheet piling acts as a beam under load and therefore requires the capability to resist bending. In certain applications, ability to resist bending is not important but strength of interlock is.
Sheet Piling is manufactured in three basic configurations “Z”, “U”, and “Straight”. They can be formed either “Hot Rolled” or “Cold Rolled”. A recent development to the industry is the production of some sheet piling shapes by the cold-forming process in which hot rolled sheet sheel is fabricated into traditional sheet piling shapes. These new additions to product availability contain interlocks which are considerably different from the hot-rolled product. Manufactured from a hot-rolled coil of sheet, it is slowly fed through a series of rollers which gradually bends or forms the steel into its designated shape.
The “Z” type configuration for sheet piling is the strongest and most efficient. These shapes resemble wide-flange beams, having a web and two flanges. Since the interlocks are located out on the flanges at maximum distance from the neutal axis, a higher section modulus for resisting bending moments is provided. Z- shapes have traditionally been used for deeper walls and heavier cvonstruction projects. However, they are now supplanting the arch or “U” shape for lighter work as more light-weight Z-shape have been introduced into the marketplace.
U-shapes resemble the hot-rolled channel sections produced on structual mills. The interlocks are formed on the web ends and interlock with their opposing mate along the centerline of the wall.
We offer all ranges of H- Pile and Wide Flange Beams.
We also have piling accessories for the material.
If you do not find what you are looking for in the links below, please contact us and we will get you what you need.
Whatever size job you have we have the hammer to do the driving.
Please contact us and we can get you prices in weekly and monthly rental rates.
We also have quick release and ground release shackles for you hammers.
We also can supply accessories on Pipe Pile and Timber Piles.
Please contact us with any inquires you may have on this material.
Please tell us your material requirements by contacting our sales team via phone or email. No job is too big or too small. We look forward to hearing from you.
945 Center Street
Green Cove Springs, FL 32043
Email: sales@pilingproducts.com
Phone: 904-287-8000
Fax: 904-529-7757
